Implant screws
| Lot / Month | 400 |
|---|---|
| Size | Φ7.5mm |
| Material | Titanium |
Screw for spinal implant, with a Φ1.5 mm through-hole. Prototype production and batch production possible in different sizes, and also possible to do colored anodizing.
Since 1950, we have been making precision parts everyday diligently and reliably.
We support our customer's manufacturing needs with a broad range of abilities,
from mass production technologies perfected over the years to single pieces of difficult to process parts.
Mechanical Watch Screw
| Lot / Month | 5,000 |
|---|---|
| Size | Φ0.9mm |
| Material | Titanium |
Titanium S0.6 Screw. Machined surfaces to meet appearance requirements.
Optical Holder
| Lot / Month | 1,500 |
|---|---|
| Size | Φ5mm |
| Material | Stainless Steel |
Optical component requires tight tolerances and strict surface finish requirements.
RC Car Wheel
| Lot / Month | 4 |
|---|---|
| Size | Φ48mm |
| Material | Aluminum |
Holes in rim for weight reduction. Spokes machined to match designer's concept.
Injector for Liquid Fueled Rocket
| Lot / Month | 1 |
|---|---|
| Size | Φ90mm |
| Material | Inconel |
Hypothetical bi-propellant rocket injector. 56 holes of 0.4mm, 1mm, 2mm. Long hole of 2mm at 30mm depth.
Micro-Contact
| Lot / Month | 10 |
|---|---|
| Size | Φ0.3mm |
| Material | CuBe |
OD/ID 0.3/0.2mm with 0.1mm slot. ±0.005mm tolerance.
Inconel Mesh
| Lot / Month | 1 |
|---|---|
| Size | Φ12mm |
| Material | Inconel |
Honeycomb shape cut from perpendicular axis on a 3 axis MC. 97.3% Volume removed. Remaining thickness is 0.2mm.
Structure Panel for Satellite
| Lot / Month | 6 |
|---|---|
| Size | 270 × 270mm |
| Material | Aluminum |
Designed with balance between weight and strength. Provided with design proposals for production.
Cluster Nozzle
| Lot / Month | 5 |
|---|---|
| Size | 40 × 40mm |
| Material | Aluminum |
Multiple flow pressure sensor orifices of 0.3mm diameter. Center hole with depth of 8mm.
HTV Small Re-entry Capsule Nozzle
| Lot / Month | 8 |
|---|---|
| Size | 75 × 75mm |
| Material | Titanium |
Thruster nozzle using 3D printing and precision machining technology. Valve interface and nozzle machined for precision.
Metal Insert
| Lot / Month | 1,000 |
|---|---|
| Size | Φ38mm |
| Material | Stainless Steel |
Cut knurling.
SEIMITSU COMA
| Lot / Month | 5,000 |
|---|---|
| Size | Φ10mm |
| Material | Stainless Steel |
In-house developed spinning top. Turns for 3 minutes as if standing still.
Wheel
| Lot / Month | 1,000 |
|---|---|
| Size | Φ50mm |
| Material | Stainless Steel |
Machined and assembled with press fit bush.
Holder
| Lot / Month | 300 |
|---|---|
| Size | Φ33mm |
| Material | Aluminum |
Low cost mass production.
Flange
| Lot / Month | 300 |
|---|---|
| Size | Φ34mm |
| Material | CrMo Steel |
Geometric tolerances close to zero for high rotation use.
Retainer
| Lot / Month | 300 |
|---|---|
| Size | Φ27mm |
| Material | HSS |
Machined with care to prevent deformation of holes.
Cotter
| Lot / Month | 1,500 |
|---|---|
| Size | Φ7mm |
| Material | Die Steel |
Example of part with tolerance relative to a paired part.
Housing
| Lot / Month | 200 |
|---|---|
| Size | Φ25mm |
| Material | CrMo Steel |
Machined with heat treatment effects in mind.
Block
| Lot / Month | 50 |
|---|---|
| Size | Φ30mm |
| Material | Brass |
Machined with care of sharp edge requirement.
Weight
| Lot / Month | 500 |
|---|---|
| Size | Φ20mm |
| Material | Brass |
In production for 30 years. Pricing without unnecessary costs.
Vented Plug
| Lot / Month | 1,000 |
|---|---|
| Size | Φ16mm |
| Material | Stainless Steel |
Hex hole machined along with OD/ID.
Valve Bracket
| Lot / Month | 100 |
|---|---|
| Size | Φ39.5mm |
| Material | Stainless Steel |
With non-standard special custom thread.
Case
| Lot / Month | 600 |
|---|---|
| Size | Φ37mm |
| Material | Aluminum |
Machined with care of uniform surface.
Chuck flange
| Lot / Month | 10 |
|---|---|
| Size | Φ62mm |
| Material | Aluminum |
Machined with precision slots.
Orifice
| Lot / Month | 15,000 |
|---|---|
| Size | Φ10mm |
| Material | Aluminum |
Produced in lots of 10 thousands.
Electrode
| Lot / Month | 20 |
|---|---|
| Size | Φ5.4mm |
| Material | TP Copper |
Fine round features at tip.
Needle Socket
| Lot / Month | 10,000 |
|---|---|
| Size | Φ8.5mm |
| Material | BeCu |
Inner machined for terminal to contact at a plane.
Spring Retainer
| Lot / Month | 200 |
|---|---|
| Size | Φ22.4mm |
| Material | Titanium |
Inner taper machined within to tolerance.
Dowel Pin
| Lot / Month | 20,000 |
|---|---|
| Size | Φ9mm |
| Material | Die Steel |
Cost reduction by engineering proposal to reduce processes.
Orifice
| Lot / Month | 20 |
|---|---|
| Size | Φ10mm |
| Material | Inconel |
Inner diameter strict surface roughness requirement met with machining processes only.
Spacer
| Lot / Month | 7000 |
|---|---|
| Size | φ10mm |
| Material | Titanium |
Example of titanium mass production part.
Button Cover
| Lot / Month | 900 |
|---|---|
| Size | φ10mm |
| Material | Stainless Steel |
Surface appearance is important for this part.
Adjuster Nut
| Lot / Month | 500 |
|---|---|
| Size | φ17mm |
| Material | Titanium |
Part with special thread form.
Cover
| Lot / Month | 100 |
|---|---|
| Size | φ40mm |
| Material | Stainless Steel |
Surface roughness requirements for seal done by cutting only.
BNC Connector
| Lot / Month | 1,000 |
|---|---|
| Size | φ12mm |
| Material | Stainless Steel |
Side pins milled, mass production possible.
Implant
| Lot / Month | 200 |
|---|---|
| Size | φ12mm |
| Material | Titanium Alloy |
Prototype to mass production.